sardina-header_2
 
<
>
 
Picture 01
Picture 02
Picture 03
Picture 04
Picture 05
Picture 06
Picture 07
Picture 08
Picture 09
Picture 10
Picture 11
Picture 12
Picture 13
Picture 14
Picture 15
Picture 16
Picture 17
 

About

/

Features

/

Specifications

Magnificent Make-Over

The La Sardina DIY is a canvas to be filled with everything you ever wanted; you can now create the La Sardina of your dreams!

Available in White and Black, these two DIY Edition Cameras dare you to go crazy and make it your personal piece of art. Wrap it in silk, splash color all over it or engrave something – the La Sardina DIY can be transformed very easily. Its special white surface enables you to design it however you want!

Take It Apart!

The camera comes with a cute little screwdriver that allows you to take apart the shell and work with all bits and pieces.

This way you can customize your camera in every creative way and match it with the wild pictures you will capture with it.

 

La Sardina Features

With its wide-angle lens, multiple exposure capabilities and rewind dial, the La Sardina is just waiting for you to take it on a thrill-soaked analogue ride!

  • Mind-blowing Wide-Angle Lens
  • Rewind Dial and MX switch that make multiple exposures easier than ever before!
  • Film cartridge window on the rear of camera to see what film you're shooting
  • Easy-to-use focusing with two simple settings
  • Bulb setting for night-time and long-exposure experimentation
  • Screw-in Cable Release Option
  • Film Type: Standard 135 roll film
  • Exposure Area: 36 x 24mm
  • Lens Focal Length: 22 mm
  • Aperture: 1:8
  • Angle of View: 88 degrees
  • Focusing Range: 0.6m - infinity
  • Shutter Speed: N (1/100), B (bulb)
  • Multiple Exposure: independent MX switch
  • Flash Contact: Unique Sardina flash contact
  • Flash Sync: first curtain X-type synchronization
  • Cable Release: Universal cable release socket
sardina-header_3
 
sardina-header_3
 
<
>
 

Unscrew the two side screws.

Remove ring (If the ring comes off easily, please continue to step 7)

Make a mark at the bottom and top (center) of the lens ring.

Use the screwdriver provided to pierce the lens ring

Pry off the lens ring using the screwdriver

Remove lens ring

Unscrew top and bottom screws

Remove plastic ring

Remove the next 3 screws

Remove the black ring

Remove the next 2 screws (above and below)

Remove the second black ring

Remove the white ring

Remove the side screws (4)

Remove the side screws (4)

Carefully unhook the frame from the top (also applies for back)

Remove plate for customization

Place customized plate in place

Latch frame back on carefully (applies to back also)

Keep all plates in place and screw frames in place (4 screws on each side)

Pay attention not to force it.

Place the white ring

Place the black ring

Screw back top and bottom screws

Place black ring

Screw back the three screws

Place back the white ring

Screw back top and bottom screws

Place the final ring in place

Screw the two side screws